Package 1: 300W solar kit
- 3pcs 100w solar panel (size1050*540*2.5mm)
- 30A 12v/24v PWM charge controller
- 1 set 3M Extension cable with PV connector
- 1 set 3M cable with alligator clip (connect to battery)
- 1 set 3 in 1 PV connector (in parallel solar panel)
Package 2: 12v 110v system
- 3pcs 100w solar panel (size1050*540*2.5mm)
- 30A 12v/24v PWM charge controller
- 1 set 3M Extension cable with PV connector
- 1 set 3M cable with alligator clip (connect to battery)
- 1 set 3 in 1 PV connector (in parallel solar panel)
- 1 pcs 12v 110v 1000w inverter
Package 3: 12v 220v system
- 3pcs 100w solar panel (size1050*540*2.5mm)
- 30A 12v/24v PWM charge controller
- 1 set 3M Extension cable with PV connector
- 1 set 3M cable with alligator clip (connect to battery)
- 1 set 3 in 1 PV connector (in parallel solar panel)
- 1 pcs 12v 220v 1000w inverter
- Excellent performance High efficiency monocrystalline solar cells offer good performance even under poor light condition,Including bypass diode, circuit with input overcurrent protection, reverse protection design
- Flexible This flexible solar panel is a good choice for curved surfaces of RV, boat,sailboat, yacht,truck, car, coach, cabin, camper , tent , trailer, golf cart or any other irregular surface.
- Practicality Light energy converts electricity, Practical and suitable for use in areas where electricity is not available and
- where the city cannot reach, such as mountains, marine, deserts, and remote areas.
- Lightweight Ultralight and Ultra-thin ,Better applied to the carrier with weaker bearing, attached to the surface, no space,
- easy to install,
- Nice Details The water resistant semi-flexible solar panel is far more durable than traditional glass and aluminum models, The junction box is sealed and waterproof.
24V Solar panel kit connection diagram
12V Solar panel kit connection diagram
Solar system kit wiring method and precautions
- The solar system kit connection is divided into parallel connection or serial connection. The controller must be first connect the battery , and then connect the solar panels.
- When the solar panels are connected in series or in parallel, paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.
- The total input power of the solar panel can’t be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.
- When the cable is connected to each component, the connection should be stable and there should be no looseness.
- The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.
- When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.
Reviews
There are no reviews yet.